What would wellness or a spa be without cozy warm to relax in. You can create a cozy atmosphere you immediately feel comfortable in with the pleasant warmth of the HEATSCOPE infrared heaters – because it only takes a few seconds to create noticeable warmth which you just want to enjoy…
The warmth is produced by two light reduced carbon- heating elements, whose light is filtered again through its high performance glass front. This results in only 15-20% of the brightness conventional heaters have – and hence, does not destroys the cozy atmosphere in spa areas but actually supports the coziness.
Such atmosphere is particularly important in order to make your guests or yourself feel comfortable when they/ you just want to chill and relax. Because that is what matters!
• almost non-visible light: max. 300 lumen – conventional infrared heaters produce a minimum of 2000 lumen
• quick noticeable heat: 100% efficiency/ performance only 30 seconds after switching it on
• perfect performance: with a high performance glass front – less light and more heat!
• various colours + lengths, enlarged heating corridor for the best thermal output in (almost) every green house / winter garden
• integrable in every home system (e.g. comfy, Elsner, KNX etc. – sufficient performance / efficiency of the actuator necessary)
• or alternatively with its own remote control ( with DEVIreg Smart Thermostat concurrent/conform to the EU 2015/1188 Ökodesign-Richtlinie 2009/125/EG)
• equipment for the assembly on walls and ceilings always included
• almost non-visible light: max. 400 lumen – conventional infrared heaters produce a minimum of 2000 lumen
• quick noticeable heat: 100% efficiency/ performance only 30 seconds after switching it on
• optimised performance: with convexly formed SCHOTT Nextrema glass front – allows the carbon heating elements to be even closer to the flats and to emit more heat.
• various colours, wider heating corridor for optimal thermal output in (almost) every green house / winter garden
• integrable in every home system (e.g. somfy, Elsner, KNX etc. – sufficient performance / efficiency of the actuator necessary)
• with DEVIreg Smart Thermostat concurrent/conform to the EU 2015/1188 Ökodesign-Richtlinie 2009/125/EG
• equipment for the assembly on walls and ceilings always included
HEATSCOPE VISION ambience and PURE design heaters are perfect for the use in saunas, spas and wellness areas. Since the ambience and the design heaters produce almost no light but cozy warmth within seconds, they create a pleasant atmosphere immediately after switching on.
This is possible since the PURE and VISION heaters (available in black or white) work with two carbon-heating elements to create the pleasant warmth – that is compared to conventional heaters 40% more heat with 15-20% less light.
The infrared medium wave beams (IR medium wave, infrared area B) work particularly effectively, for example, when installing the infrared heaters in covered, wind-protected spa and pool outdoor areas.
A pleasant heat corridor will be produced only 30 seconds after switching on, in whose V-shaped cone you can feel the warmth on you. With that, nothing will stand in your way when you want to relax and chill.
With either its own thermostat control or integrated in a home system (such as Elsner, KNX or comfy) they are easily switched on and off and also switched between the two heat tiers (50% + 100%), in case it should get too warm at some point.
ATTENTION: Of course, you can also use the HEATSCOPE SPOT power heaters in wellness areas, spas and in pools, since they are suitable for (almost) every environment.
