Quick feel-good warmth
HEATSCOPE® infrared heating systems generate a pleasant and cosy warmth, like from a tiled stove. The special glass allows the tiled stove heat generated behind a ceramic layer to pass through and thus very quickly heats up the body as well as objects and subsequently also the air and thus the room.
Energy-saving heating
Thanks to the short reaction time of the HEATSCOPE® infrared heating systems, internal as well as external heat gains can be utilised. Every zone and every room in the home is heated to the desired room temperature with low CO² emissions, using PV or green electricity – quickly and precisely.
High efficiency indoors
Whether a new building is to be supplied or an existing heating system is to be replaced or supplemented, the HEATSCOPE® indoor infrared heating system is ideally suited as a building heating system, individual room heating, for heating support or as an area heating system within a room.
Depending on the model, wall or ceiling mounting or flush integration is possible. In the standardised and square version, the HEATSCOPE® PULSE fits perfectly into a grid ceiling and ensures even heat distribution in the room.
HEATSCOPE® ROOMS heating solutions are constructed in such a way that hardly any heat is emitted to the back of the heaters. Especially with wooden walls, wallpaper or lightweight walls, too high a temperature at the back of heaters can cause damage to surfaces of the building. The focus is on the front, so that no energy is wasted towards the back.
The infrared heating systems are equipped with a Energy-Management-System (EMS) – this means: resource and energy-saving heating without losing heat.
Due to a short reaction time of the heaters, energy is utilised immediately. The unit heats up quickly and cools down again quickly when switched off. As soon as the target temperature is reached, energy is only added to maintain the temperature. A process that saves an enormous amount of energy. During use, the heating element almost never switches off completely. Through this control, the system avoids overshoots or undershoots in energy consumption and temperature development.
The overshooting of the surface temperature is prevented by the system automatically reducing power befor the target temperature is reached. Now, only as much energy is used as necessary.
As per EU regulation 2015/1188 Ecodesign Directive 2009/125/EG the operation of HEATSCOPE infrared heaters during the use in closed rooms obligatory has to be effected through a certified thermostat control system (e.g. “DeltaDore” or “Salus”).
With its high-quality materials, timeless design and high energy efficiency, the HEATSCOPE® PULSE provides pleasant, fast and tangible heat.
To make the HEATSCOPE® PULSE infrared heater as easy to use as possible, it can be equipped with a pre-installed thermostat control (Delta Dore).
As soon as the panel is connected to the power and a target temperature has been defined, it is immediately ready for use. Alternatively, the radiator can also be connected to any smart home system.
The HEATSCOPE® TUNE towel heating system transforms your bathroom into an oasis of well-being.
With its purist look and high-quality materials, the HEATSCOPE® TUNE is also a design element in the room.
It includes an integrated control system that is operted and programmed by touching the surface of the unit. In addition, the panel, optionally equipped with a Bluetooth interface, can also play your desire music on the side.
HEATSCOPE® ROOMS heating elements heat the room evenly and pleasantly. Energy is only used when someone is in the building or heat is needed. HEATSCOPE® ROOMS infrared heating systems can be installed unobtrusively or as a design element on the wall or ceiling.
Existing heating can be supplemented or replaced, new buildings can be efficiently equipped with heat or individual heating elements can be used as heating support or area heating within a room.
When infrared heating is combined with a renewable energy system, every zone and every room in the home can be heated to the desired room temperature with low CO² emissions. The coupling of the infrared heating element with a photovoltaic system is particularly recommendable.
Years of development and production SWISS MADE guarantee a service life of least 10 years on all HEATSCOPE® ROOMS heating panels.
Once installed and connected to the power source, no further maintenance is required.
HEATSCOPE® ROOMS heating elements as area heating:
With the infrared heaters, individual areas can be heated efficiently. The heat output is targeted and the entire air in the room is not heated first.
HEATSCOPE® ROOMS heating elements in new buildings:
New construction of efficient houses is now very attractive and sensible. The low purchase costs contribute to the rethinking of infrared heating.
HEATSCOPE® ROOMS heating elements in existing buildings:
Infrared heating offers many advantages, especially in older buildings. Intelligent and digital control creates a pleasant and comfortable indoor climate. The energy demand is less, due to dry walls. Investment costs are lower and there are no maintenance costs.
HEATSCOPE® ROOMS heating elements as heating support:
Not every room needs to be equipped or heated with central heating. These are certain areas such as hobby rooms, basements, guest bathrooms or rarely udes offices. Heating elements from HEATSCOPE® ROOMS are a practical and inexpensive solution for this purpose.
